Dewalt DWE7485 Vs DWE7491RS

Table saws are not only powerful but also convenient to cut lots of load in one sitting; something that will require time and much energy for a manual saw. But, not all of them will match your application which is why it is necessary to consider the choice such as Dewalt DWE7485 Vs DWE7491RS. These jobsite saws are easy to use, powerful, efficient but also different and for those currently considering buying one of them, let’s see below about what you can expect because we will compare the two.

In this comparison, we are going to talk about:

  • What to Look for in a Table Saw
  • What are Dewalt DWE7485 and DWE7491RS
  • How are the Design of Dewalt DWE7485 and DWE7491RS
  • How are the Specs of Dewalt DWE7485 and DWE7491RS
  • How are the Capacity of Dewalt DWE7485 and DWE7491RS
  • How are the Performance of Dewalt DWE7485 and DWE7491RS
  • Dewalt DWE7485 Vs DWE7491RS

Buying a Table Saw

Power tools are convenient in general because the mechanism is taking some of the physical burdens from our body and it also helps us work with tougher materials, those that will be difficult to cut or make a hole through with manual tools only. The type of tools will vary widely depending on what type of work you are doing but in general drill drivers, impact drivers, or some type of mechanical saws will be very helpful in a lot of situations.

Table saw for example is necessary to make cuts from stock in a much faster pace compared to when having to do it manually and in addition, is more accurate compared to circular saw for example because the blade is stationary and there is a fixed guide as well to make the perfect cut. If you are currently looking for a table saw as well, here are some factors to consider before making a decision because not all of them will be adequate or fitting in your type of application.

The core of a table saw is the blade itself and it is important to consider what blades you will be using. Standard blades are usually 10-inch in diameter which will give you about 3.5-inch of cut depth at 90 degree so the larger the blade the deeper as well they can cut and the thicker material they can work with, effectively. While most table saws are made to cut wood, depending on the blade they can cut other materials as well.

Next is the rip fence which is going to provide the cutting guide and is placed next to the blade itself but is not fixed or can be moved to a certain length. This is very helpful to lock the material so it won’t move around and provide a more accurate rip or cut compared to other mechanical saw like the circular saw. The important point is the fence must be able to lock in place as firmly as possible to make sure the material doesn’t move and also still be easy to adjust when needed.

 Dewalt DWE7485Dewalt DWE7491RS
Product Dimensions22.75 x 22.75 x 13 inches31 x 24.5 x 31 inches
Shipping Weight54 pounds53.7 pounds
Best offerCheck priceCheck price

The rip fence is also related to the capacity of the table saw because it limits the length or width of the material; some larger table saw can be added with extension table to increase the capacity but most jobsite table saws can be quite limited.

Another important aspect is the miter gauge and this is the gauge that holds the material at specific angle to make the accurate cut. You can adjust the angle from -45 to 45 degree and since the gauge will be placed at either the right or left of the blade through a slot, make sure the system it uses is not proprietary or sort of because it will probably be more difficult to find its accessories in comparison to the common type.

About Dewalt DWE7485 and DWE7491RS 

Now when you already have an image on what to look for in the tool, it is time to see what the market has to offer. In most cases they will have similar features or the basics but something like capacity will vary widely even from the same manufacturer and models at the same price range. We also recommend looking for features that will be useful in your type of application such as whether the table saw needs to be compact or easy to move around.

Most power tool brands usually carry a collection of jobsite table saw including Dewalt. This Stanley Black & Decker brand is one of the most popular options as well in the power tool’s section with plenty of options to choose from. Their table saws are ideal for a light to medium application and even for beginners because the mechanism is designed with ease of use and safety. They tend to be not as versatile however if you are in for a saw that can do any type of cuts.

Some of the most favorite jobsite table saws from the brand are Dewalt DWE7485 and DWE7491RS which are not exactly the same to each other. Before the DWE line we have DW jobsite table saws and many of them are suitable for the same type of work as well. The DWE is a newer line and is easier to find in the market consisting of 8.2 and 10-inch blades but you will find DCS option as well which surprisingly is running on battery.

The basic difference between Dewalt DWE7485 and DWE7491RS is the blade size so this is related to the cut depth of the blade itself and if you want to shorten the shopping process, we suggest choosing based on what maximum depth you will want to have. In addition the latter do have some useful features that you may like or need but for the overall performance, they should work great for the typical application we often use on the light to medium tasks. Read also: Dewalt DWE7485 Vs DW745 here.

Dewalt DWE7485 and DWE7491RS Design

The main tool itself is not far apart from each other but since the latter is holding a larger blade, the housing is also bulkier and heavier than your DWE7485 while the weight itself is almost double at 90 lbs. This is probably why the DWE7491RS is coming with a pair of wheels. These wheels will be very helpful to move the tool around and are made solid with a rubbery surface so we don’t have to worry about flat tires. They are bolted in and it is possible to remove it in case you need to use other similar wheels.

Dewalt DWE7485 and DWE7491RS Specs

Now moving to the most important part, let’s see what Dewalt DWE7485 and DWE7491RS can offer to you starting from the motor. Both of them are using the same 15 AMP motor so the efficiency and performance will most likely be on par with each other as well but, the main difference is DWE4591RS will come with the 10-inch blade while DWE7485 is a 8 ¼-inch type. The speed is also different at 5,800 compared to 4,800 RPM respectively while the arbor size is the same at 5/8-inch type as well.

Dewalt DWE7485 and DWE7491RS Capacity

In capacity, this is where Dewalt DWE7485 and DWE7491RS are separated the most because with a larger blade naturally your DWE7491RS will be able to make a deeper cut as well on the highest blade height which is 3 1/8-inch instead of 2 9/16-inch at 90 degree setting while the 45 degree is at 2 ¼ and 1 ¾ respectively. Not only is the depth of cut, the next saw also carries a larger cutting capacity from the right side at up to 31 ½-inch compared to only 24 1/2-inch.

On the left side, DWE7491RS is almost twice as long as the DWE7485 at 22-inch compared to 12-inch. Thus, not only the blade size, the next table saw is also carrying a larger capacity in general for a wider material so we don’t have to install another support or modify the table. But, in case your type of job doesn’t require as much capacity, the former can be a lightweight choice to save the effort and budget.

Dewalt DWE7485 and DWE7491RS Performance 

Lastly on the performance, both Dewalt DWE7485 and DWE7491RS are working really well. Considering larger blades will usually give a faster cut, the increased speed on DWE7485 will make up for it and with everything coming in the package, you can make lots of cuts with any of the two saws. They have the common miter gauge as well as adjustable fence. This fence is very convenient because of the rack and pinion telescoping fence rails to make adjustment a breeze.

The rails are on both sides of the saw or top and bottom so it eliminates the chance of misalignment. You don’t need to exert much effort too when sliding them across the right side because it uses a simple lock mechanism in which there is a latch we need to lift and lock again to set the position.

Dewalt DWE7485 Vs DWE7491RS

The two jobsite table saws are ideal for many types of applications and mostly used on the light to medium application. There is enough power to provide an accurate cut and enough capacity to work with various material sizes. The difference is mostly in the capacity in which DWE7491RS is larger than what DWE7485 can offer. It is also heavier in terms of weight but the wheel does help in maintaining the mobility of the tool itself. As for the overall ease of use and features, they are identical but you can use dado stacks with DWE7491RS.

- Portability: Compact size for ease of transportation and storage.
- Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate.
- Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets.
- Onboard storage: Onboard storage provides easy access to the site pro guarding components and push stick when not in use.
- Your purchase includes a Dewalt table saw, 24 tooth carbide blade, roll stand, push bar, miter gauge, rip fence, 2 blade wrenches, DEWALT DW3219PT blade guard + saw blade assembly manual from 10 Inch 80T Fine Cross Cut Saw Blade.
- Other Specifications: Maximum Rip Left of Blade - 22 "| Max Rip Right of Blade - 32-1 / 2" | Maximum Socket Width - 13/16 "| Shaft Size - 5/8" | Amps - 15 | Depth of Cut at 45 ° - 2-1 / 4 "| Depth of Cut at 90 ° 3-1. / 8" | No-load speed: 4800 rpm.
- Rolling stand designed for easy installation and removal with excellent stability.
- It features a 15.0 Amp high-torque motor with the power to cut pressure-treated lumber and hardwood.


It is best to shop based on what you will need from the tool and if you think the capacity of DWE7485 will be sufficient, we recommend to choose this table saw but if you need more or want to use dado, then the DWE7491RS will be the most ideal choice.

Leave a Comment

Your email address will not be published. Required fields are marked *