Makita 2012NB VS DeWalt DW734

A thickness planer is a very useful tool to have if you are going to work on the imperfect material at home or jobsite. They are fast and reliable to make sure two surfaces are even to each other and there are so many options that we can buy such as Makita 2012NB Vs DeWalt DW734. These planers are some of the best and proven to work really well but they are not the same so let’s see what to go for based on the comparison below.

In this comparison, we are going to talk about:

  • What is the Difference Between Planer and Jointer
  • What are Makita 2012NB and DeWalt DW734
  • How are the Machine of Makita 2012NB and DeWalt DW734
  • How are the Specs of Makita 2012NB and DeWalt DW734
  • What else Makita 2012NB and DeWalt DW734 can offer
  • How are the Performance of Makita 2012NB and DeWalt DW734
  • Makita 2012NB Vs DeWalt DW734

Thickness Planer and Jointer

Power tools are incredibly convenient because they can remove the burden from your body. When working on something, we must put a force or at least navigate the tool to achieve a desired result so being motorized the process is becoming faster and can be done more effectively as well as efficiently. For those working with woods as the material, you may need to shape them according to the product they are going to be used for and each project may call for different specs.

There are stocks that are ready to use but it can be difficult to find the exact measurement or they can be too expensive. There are some machines that can be used to help create the perfect material manually such as a jointer and planer. These machines are very similar to each other because the two are meant to cut a plank of wood. The main function however is different and they are not replacing one another but works best together.

Many woodworking tools are easy to understand such as a table saw which is a saw mounted on a table so we can cut the material with it or a drill which is necessary for almost any task as it helps you connect one part of a material to another by making holes on them. However, a jointer and planer are not as straightforward in terms of how people call it. Making it even more confusing, what we call jointer here is known as planer on the other continent.

You can easily tell them apart based on how the machine looks actually and a jointer is the one without an enclosure. This machine is used to create a perfectly flat surface on one side of a rough board but can be used to create a perfectly flat edge at 90 degree too, based on the flat surface. A planer on the other hand, has an enclosure so you can’t see the blade as it is concealed in the housing and instead of mounted on top, the material goes between the base and top.

This machine is used to create the second surface that is parallel to the first one which is why a jointer is used first and then you can put the plank in a planer to achieve a specific thickness. It is meant to make the board similar in thickness but it is not a guarantee that the board will be perfectly straight because it is working based on the first face by pressing it down. If the first face is wavy or bumpy, the other side will follow the pattern.

 Makita 2012NBDeWalt DW734
Product Dimensions30.35 x 19.02 x 15.79 inches
24 x 17 x 21 inches
Shipping Weight61.8 Pounds80 Pounds
Shop now at AmazonCheck priceCheck price

About Makita 2012NB and DeWalt DW734

You may need both or just one depending on which seems ideal for the work flow but they are amazing together because for example before we can make an evenly thick material we need to make sure the other surface is flat first. Some people may also want a jointer only to even both sides but while it is possible to flatten both sides, it is hard to get an even thickness with just the jointer which is why both are best when used with each other.

If you are here then we assume that you only have to buy the planer. There are various options to go for and usually a table planer is still below $800 for the working set. Many are less than $500 as well depending on the model and brand. Makita and DeWalt for example are some of the most popular options that are both carrying the planers made for jobsite and compact enough for enthusiasts or professionals to fit in their working space.

For those who are going to work with material not larger than 12 inches in width, the Makita 2012NB and DeWalt DW734 are going to be the perfect choices. They are currently quite different in price range while specs wise you can say they are on par with each other. The DW734 is an older variant of DW735 that you can check in our DeWalt DW735X Vs DW735 here so in terms of performance and overall specs this model is going to be a lower variant as well.

The DW735X and 2012NB are currently about the same in price range with DeWalt coming with higher specs and capacity. The main difference between Makita 2012NB and DeWalt DW734 is mostly about performance because while not as powerful as the new model, DW734 is still a reliable planer that can work almost the same across different wood types. However, Makita is still very useful and we do think it is easier to set up too.

Makita 2012NB and DeWalt DW734 Machine

As for the design, both are using a similar mechanism. There is a fixed housing that supports the moving blade inside and the main motor. This frame is fixed but the blade housing can move up and down to follow the height of the material. The crank is located at the top and you rotate it to lower or increase the clearance. The machine’s material seems to be the same and made of a very durable steel but for the machine only DW734 is heavier than 2012NB.

Unlike a variant of DW735, the DW734 comes with the folding table attached to the body so they require less step to set up but just like with any cutting machine, you will need to do some setup and fine tuning. One of the most important steps is making sure that these tables attached are level to each other since they may be shipped at different conditions and the company may also have different levels of quality control.

Makita 2012NB and DeWalt DW734 Specs

Now for the most important part, let’s see what the Makita 2012NB and DeWalt DW734 can offer starting from the basic specs. The specs said that these planers are planing maximum width of 12 inches of plank with DW734 being slightly wider at 12.5 inches in maximum. The highest material height to slide between the planers are 6 inches or for 2012NB it is 6.09 inches to be exact. As for the maximum depth of cut, they can cut at 1/8 inch.

The main difference in our opinion is that DeWalt DW734 being a triple blades model instead of using two blades. These blades are not visible from the outside but more blades simply means faster cutting process since it increases the cutting frequency at the same feeding rate. However, for the feeding rate itself when there is no load, DeWalt is rated at 1000 RPM while Makita is at 8500 RPM.

Makita 2012NB and DeWalt DW734 Features

Next for the features, both Makita 2012NB and DeWalt DW734 are very much the same since you can find all the basic features here. There is of course height adjustment and the cutting depth monitor to select how deep you want to shave the board. The power button is designed to be safer to use because to activate the blade it is by pulling the cover and to turn it off we just need to press it. The height measurement is often not as accurate however.

Makita 2012NB and DeWalt DW734 Performance 

Lastly for the overall performance, these planers are similar on some parts but also different on the other factors. On the feeding rate, DeWalt is faster and it seems to maintain the speed even when added with load. The loaded speed will be slower in general as the motor has to put more effort. But, when it comes to actually shaving the board, DW734 is not only fast but also more powerful. Different wood types have different sturdiness so the experience will vary.

What’s impressive is that the DW734 is both faster and feels lighter when pulling the board. Probably due to the motor and its triple blades, it can shave the same board faster compared to 2012NB. The difference is quite noticeable or about twice as fast for the same material. For example they are slower when working on mahogany but much faster when shaving oak.

Makita 2012NB Vs DeWalt DW734

The Makita 2012NB and DeWalt DW734 are both reliable planers but they are not the same based on the performance. The specs are very much the same but when shaving the board, DeWalt is more reliable or faster when working on the same material. These planers seem to still be powerful regardless of the material but Makita is easier to set up so it may be more convenient for first time owners. In terms of accuracy DW734 is also more reliable based on the setting used.

- Compact with less weight for easy transporting to the jobsite
- Engineered for faster, easier blade changes
- Low noise (83dB) for operator comfort
- 4-post design and diagonal cross supports for stability
- Powerful 15 amp, 20,000 rpm motor of the woodworking planer handles larger, deeper cuts in hardwoods.
- Three-knife cutter head with 10,000 rpm cutter-head speed of the thickness planer provides 96 cuts per inch, one of the finest finishes of any portable planer
- Disposable, reversible knives of the wood planer deliver 30% more knife life and make knife change fast and easy.
- Four-column carriage lock drastically reduces the movement that causes snipe


The decision is all yours because both Makita 2012NB and DeWalt DW734 are useful but, we will recommend getting the DeWalt DW734 for its overall qualities. The machine is pretty affordable and it is pulling some serious power with triple blades setting to effectively shave the board.


Leave a Comment

Your email address will not be published. Required fields are marked *