Makita LS1216L vs DeWalt DWS780

Makita LS1216L and DeWalt DWS780 are two miter saws that offer compact design, great power, and superb precision. Both products come from renowned manufacturers. So, which one is actually better? Let’s see the comparison between Makita LS1216L vs DeWalt DWS780 below to choose the best miter saw for you!

What we will discuss in this article include:
– What tools and accessories that come with each model
– Which model that is more portable and easier to use
– The cut capacity on Makita LS1216L vs DeWalt DWS780
– The comparison of their power, speed, and accuracy
– The reason why DeWalt DWS780 is overall more recommended

What’s In The Box?
First of all, let’s see what items which are included in each model’s box. Different products may come with different tools and accessories. It is always a good thing if the product comes with the equipment that you actually need, as you won’t need to spend any extra money to get the said equipment. See also: DeWalt DWE7480 vs Bosch GTS1031.

Makita LS1216L comes with more items in the box. It already includes all the necessary accessories to get started with the miter saw. There are also some miscellaneous items that can be handy for some people. So, it is a very good value for the money. The box includes the following:
– 60T TCT Saw Blade
– Vertical Vise
– Wrench
– Dust Bag
– Triangular Rule
– The 12-inch Dual Slide Compound Miter Saw

DeWalt DWS780 has fewer items in the box, but all the essentials for getting started with the miter saw are already included. It does not come with a triangular rule for squaring blades or fences. However, this is not a big problem. The box includes the following:
– 60T Carbide Blade
– Vertical Material Clamp
– Blade Wrench
– Dust Bag
– The 12-inch Double Bevel Sliding Compound Miter Saw

Portability And Ease Of Use
Both Makita LS1216L vsDeWalt DWS780 are quite compact and portable. They are also relatively easy to set-up. However, as far as portability is concerned, we must say that DeWalt DWS780 is slightly better.

Makita LS1216L has a compact design which features the company’s patented 4-Steel Rail Sliding System to enhance the rigidity and cut quality. It has a large capacity, and it is known for making extremely precise cuts. However, you can’t be further from the truth if you think that this model is difficult and complicated. In fact, it is the contrary; it is quite simple and intuitive to use.

The first thing to do with any miter saw is calibrating the unit. Although the company has calibrated the miter and bevel while the product is still in the factory, the calibration may get altered during the shipment. Makita LS1216 has three bevel points that need to be calibrated (0 degrees, 45 degrees right, and 45 degrees left), so the process may take some time. Be careful, you need to avoid over-tightening the screws.

The included stand has three selectable positions. You will need some time to get used to the thing. The first position is at the ground level. The second position is slightly above the ground, suitable for a sitting position. The third position is for the full standing position.

DeWalt DWS780 comes with a fairly conventional design, which is a good thing. You will find it very intuitive to use. It is also really compact and quite lightweight for a miter saw, so it is highly portable and easy to bring around. If you often work in dynamic environments, this is a very good solution for your need.

As usual, you need to check the calibration before actually using it. However, DeWalt DWS780 usually comes with a properly calibrated miter and bevel. It is very easy to set-up. It has a fence which secures the blade guard in place. Changing the blade is easy, as you only need to loosen two bolts which secure the blade in place.

This unit has a double bevel design that enhances the ease of use. It has highly visible black markings on the scale which has a chrome-colored surface. So, you can clearly see what you are doing. However, the table is sold separately. You will need to purchase the table, which is also quite portable and has excellent build quality.

Cut Capacity
The next difference between Makita LS1216L vs DeWalt DWS780 is the cut capacity. In general, both models are suitable for various jobsite applications. However, Makita LS1216L is particularly better for taking care of nested crown materials, whereas DeWalt DWS780 is great for cutting general materials quickly.

Makita LS1216L has a very good cut capacity. On this unit, the full cross cut capacity at 90 degrees is 15 inches and the maximum thickness is 3-5/8 inches. Meanwhile, if you are a crown molding specialist, you are probably also excited for the 6-1/2” vertical cut capacity, which leaves some room for an 8” nested crown material.

You can find a crown molding stop on the top rails of Makita LS1216L. This is designed to help maximize the vertical cut capacity. Although it is made from plastic, it is quite sturdy and durable. It is also very easy and intuitive to use. You only need to flip the switch in order to slide the stop into position, and then lock both rails into place.

DeWalt DWS780 is able to cut at 90 degrees with a maximum capacity of 16 inches. This is impressive. The large capacity makes it so versatile. You can use it for many different jobs, including cutting a 2×12 material at 45 degrees. Hence, it can reduce the usual burden of cutting wide materials using a chop saw, and it will allow you to finish your projects more quickly.

One of the coolest features of DeWalt DWS780 is the ability to cut horizontal miters and vertical bevels simultaneously. Simply put, it is awesome. It will make complicated cutting jobs a lot faster and easier. In addition, because of the unit’s sliding design, the maximum cutting width is also increased.

Speed and Power
In terms of speed and power, both Makita LS1216L vs DeWalt DWS780 are great. They both are armed with 15-amp motors, so they are supposedly able to deliver serious power for various professional tasks. A notable difference is that Makita LS1216L has a lower maximum rotational speed than DeWalt DWS780.

Makita LS1216L has a 15-amp motor which can cut through any lumber, plastic, aluminum, or even steel material. Just make sure that you use the suitable blade for every material type. The no-load speed of this miter saw is 3200 RPM, which is slightly lower than most other models in the category. However, it is able to deliver smooth and clean cuts. In the test which involves pressure-treated pine, Makita LS1216L performs like a hot knife cutting through butter.

There are a few reasons behind Makita LS1216L’s amazing performance. First, it utilizes a direct-drive motor with an electronic speed control. Direct-drive motors are able to perform consistently without losing any speed, unlike belt-driven motors which may get loose over time. Second, it comes with excellent stock blades which will allow you to have a strong start before you buy more specialized blades.

DeWalt DWS780 also has a 15-amp motor, but it has a higher maximum speed which is 3800 RPM. It has plenty of power. You can cut a 4×4 pressure-treated post very smoothly without any issue. While cutting with this unit, you never have to worry about the power, even when you are dealing with a tough material. It also comes with high-quality blades which are solid and durable.

Makita LS1216L has impressive accuracy. To begin with, it has a switchable super-fine laser, which will allow you to align the cut as precisely as possible. Furthermore, it comes with the Deep Exact Cutting Technology (DXT) with a double sliding guide fence and the 4-Rail Sliding system to ensure precise cuts.

While other saws tend to have some problems when making 45-degree bevel cuts, Makita LS1216L is very accurate and reliable. Perhaps the only weakness is that the bevel angle is somewhat difficult to adjust. You can make 45-degree bevel cuts without any obstacle, but you will need to fiddle with the bevel stop lever in order to adjust it to 22.5 degrees or 33.9 degrees.

DeWalt DWS780 does not have a laser. Instead, it is equipped with the XPS Cross Cut Positioning System. It deploys a small yet powerful LED light directly over the saw blade. This is a very cool feature; as the blade is lowered, the shadow of the blade narrows to the exact location and width. Interestingly, the shadow remains highly visible even when you are working under direct sunlight. And, unlike laser guides, this system does not lose accuracy when bumped.

The performance is consistently precise and accurate. DeWalt DWS780 has 10 positive stops which allow you to cut at various angles quickly and easily. You will be able to make repeat cuts at those angles with consistent results.

Makita LS1216L vs DeWalt DWS780

- Powerful 15.0 AMP direct drive motor requires less maintenance and delivers 3,200 RPM
- Large cutting capacity for up to 8"" crown molding (nested), 6-1/2"" baseboard (vertical), and 15"" crosscut at 90°
- Compact design with a patented 4-Steel Rail Sliding System further increases rigidity to produce superior cuts
- Independent laser indicates line-of-cut whether blade is turning or not, with on/off switch and micro-adjustments for precise ""left-of-blade"" or ""right-of-blade"" cutting
- Exclusive 6 linear ball bearings engineered to deliver smooth, solid, and adjustment-free ""dead-on"" accurate cuts
- Integrated XPS cross cut positioning system provides adjustment-free cut line indication
- Powerful 15 amp, 3,800 rpm motor delivers extended power and durability
- Exclusive Back Fence design cuts up to 2 by 16 dimensional lumber at 90-degrees, 2 by 12 at 45 degrees
- Adjustable stainless steel miter detent plate with 10 positive stops improves productivity, ensures accuracy
- Super efficient dust collection system captures over 75-percent of dust generated

Between these two models, DeWalt DWS780 is generally more recommended. It is generally more portable and easier to use. It also has a higher maximum speed. It can handle complicated cuts quickly, thanks to the ability to make horizontal and vertical cuts simultaneously.

Leave a Comment

Your email address will not be published. Required fields are marked *