Milwaukee M12 Vs Ryobi 18V

Drill drivers are very convenient and they are almost like the basic power tool that will be useful in the house, even if you are not utilizing them as often. The power rate of a tool usually plays a role in deciding the overall performance as well, such as Milwaukee M12 Vs Ryobi 18V. The lower rating doesn’t always mean they are unreliable and vice versa so before deciding to choose one, let’s see below about what you can expect from these tools.

In this comparison, we are going to talk about:

  • Which to Choose Between Drill Driver and Impact Driver
  • What are Milwaukee M12 and Ryobi 18V
  • How are the Design of Milwaukee M12 and Ryobi 18V
  • What are the Specs of Milwaukee M12 and Ryobi 18V
  • How are the Performance of Milwaukee M12 and Ryobi 18V
  • How are the Experience with Milwaukee M12 and Ryobi 18V
  • Milwaukee M12 Vs Ryobi 18V

Drill Driver and Impact Driver

When buying a power tool, we are faced with so many different options from so many different brands and models. Most of them are looking very much the same to each other and this can get confusing as we didn’t plan to browse around the amount of choice. But, among the typical or most useful tools, drill driver and impact driver are probably the most versatile options to buy, even if you don’t always use them or are not exactly a DIY enthusiast.

Their main functions are to make holes and fastening or unfastening screws so naturally we can choose any of these two for these typical tasks. They are rotating around the same idea but not exactly the same and you may be better with using one of them. Physically, we can easily tell which one is a drill driver and which is an impact drill based on the size because impact drills don’t have a clutch setting so in comparison they are smaller or shorter.

This is an advantage over a regular drill because while companies can make a drill driver to be shorter, they are not going to be as short as an impact driver without the clutch adjustment. This way impact drill allows for a better fitting in case your working space calls for narrower tools too, such as between joints, inside cabinets, etc. While the two can make holes or drilling depending on what bits you attached, the drill driver is usually better at this task.

If you see the chuck of the drill driver and impact driver, their mechanism is also different. An impact driver will have a ¼-inch hexagon bot retainer to allow for quick bit changing. On the other hand a drill driver uses a three-jaw chuck to hold the tool’s accessories or bits. This way the drill can hold various bits shapes including hexagonal, round, and even triangular shaped shanks which makes it more versatile in terms of the accessories we can put on the tool compared to impact drivers.

 Milwaukee M12Ryobi 18V
Product Dimensions6.2 x 1.79 x 6.48 inches7.8 x 6.3 x 3.3 inches
Shipping Weight2.5 pounds3.1 pounds
Best offerCheck priceCheck price

Their working mechanism is also different because an impact driver is delivering torque by releasing energy from a spring so the motion causes rotating hammers to strike an anvil many times per second. As for drill, this tool has a constant turning torque using gears thus, its movement is purely rotational while an impact driver also puts a hammering motion to the rotational effort. This difference also makes the two tools behave differently in applications because while an impact driver gets stronger along the speed, a drill driver gives a higher impact when it slows down.

About Milwaukee M12 and Ryobi 18V

Just like with any power tools, we will have so many to choose from based on which seems to work best in your application. If you are here then we assume that this power tool focus or main task is to make holes and not to drive screws which is what a drill driver is perfect at. This tool will be useful as well for fastening or loosening screws yet with usually lower torque in comparison. Plenty to consider too, and you may like one or more companies to buy the product from.

If you don’t want to invest on a new battery, it is wise to shop based on your other power tools or those that can use the same batteries since companies usually make them to be compatible with a huge amount of their other cordless tools. Also consider the power rating because in general the higher the battery means the more powerful as well it can drive the motor despite not always guaranteed. Among those many options, Milwaukee and Ryobi are two companies with impressive collections of power tools.

Their cordless range is often deemed as powerful and reliable while also well-priced to match different users. For example the Milwaukee M12 and Ryobi 18V line which are priced around the same level but the latter is rated higher. What we are going to compare today is their drill driver and for the specific model we are using the 3/8 inch 2407-20 to PDD209. You can find many other alternatives to these drills but we choose these smaller ones for the lighter use only.

These drill drivers are very useful for the typical application around the house but make sure that you are also choosing the one that fits in the task best. The Milwaukee M12 and Ryobi 18V line are promising alternatives to other popular brands like DeWalt which are often being more expensive for the similar tools with the same power rating. For these two, we don’t have to spend so much but still get reliable performance. Read also: DeWalt DCD780 Vs DCD771 here.

Milwaukee M12 and Ryobi 18V Design

Being the budget options, don’t let these drill drivers fool you because they are very well-made just like typical cordless power tools we have seen and used. None of them are compact however since the length from the chuck and base of the tools are about the same. But, since the M12 is using a smaller battery, this drill driver is more compact when it comes to length from the top to the base where the battery is attached. You can buy these drills with the battery or just the drill if you already have the battery from other similar power tools.

Holding these drills are very easy but the extra weight of Ryobi 18V may give a sense of stability or vice versa the M12 will be more comfortable due to its petite size (only 7.2 inch) without the battery from top to bottom. The handles are textured on both tools and they are comfortable to hold, along with the variable trigger style. Milwaukee is slightly tilted on the head or main body so it is easier to reach tricky corners using this drill.

Milwaukee M12 and Ryobi 18V Specs

Moving further, let’s see what Milwaukee M12 and Ryobi 18V can offer starting from the basics. None of them are using brushless motors and this is one of the reasons why these tools are very affordable. Milwaukee may be small but it is capable of delivering up to 1,500RPM on the highest speed setting while the maximum torque produced is claimed to be 275 in-lbs. On the other hand the 18V drill from Ryobi is delivering 6,000RPM under no load at the highest setting yet they don’t claim any torque level for this drill.

Milwaukee M12 and Ryobi 18V Performance

Performance wise, these drills are what you can expect from a lightweight and affordable range. They are most suitable for the typical task around the house such as light house improvements or just attaching something on your wooden wall. The torque and speed of these drills are not adequate for making holes on concrete walls so it is best to only work with woods or other softer material. In comparison the Milwaukee is much better both on the power rating as well as on versatility.

What we are not very fond of Ryobi 18V is the tool only has one speed setting and even on the highest setting or the furthest your trigger pressed, this drill can only produce slower rotation means it is also slower when dealing with the workload. While not being the fastest and powerful drill, Milwaukee M12 is still better here thanks to the more than twice higher rotation as well as higher torque force. This will make sure the drill can handle a wider task given to it.

In addition, it is still equipped with two speed levels so we are not locked with the same speed range and if needed, we can just lower the speed and increase the torque to handle thicker or larger bits which is very limited on the latter tool.

Milwaukee M12 and Ryobi 18V Experience

Lastly we want to talk about the overall experience with Milwaukee M12 and Ryobi 18V. The battery life is pretty good with these drills and they are both keyless so we can just use bare hands to remove and change the bits. The batteries are easily attached to the housing as well since you can just slide it and they will instantly lock into position. Additionally, their battery life is pretty good as well to last for a pretty long application.

Milwaukee M12 Vs Ryobi 18V

Both of them are good options based on what you are going to use them for. In comparison even though they are affordable, performance wise the two are reliable but Milwaukee M12 is much better because this drill is coming with two speed levels, higher speed at more than twice higher than Ryobi 18V, as well as higher torque force to drive your bits through harder or thicker material.

- Driver Drill (3/8, M12 - Bare
- The product is user friendly and easy to handle
- The product is very resistant.
- Drill / Driver: 3/8 '' 2-sleeve chuck
- Drill / Driver: 24-position clutch adjusts torque output to control screw or closure depth
- Drill / Driver: Variable speed trigger produces 0-600rpm


You can go well with any of the two but they are not the same and personally we will recommend getting the M12 from Milwaukee because this drill is overall better and more capable at the similar price range, compared to Ryobi 18V specific to the models we are talking in this article.

Leave a Comment

Your email address will not be published. Required fields are marked *